Did you know that you are carrying a 3D magnetometer? That you can use your phone as a pendulum to measure earth's local gravitational acceleration? That you can turn your phone into a sonar?
phyphox gives you access to the sensors of your phone either directly or through ready-to-play experiments which analyze your data and let you export raw data along with the results for further analysis. You can even define your own experiments on phyphox.org and share them with colleagues, students and friends.
Selected Features:
- A selection of pre-defined experiments. Just press play to start.
- Export your data to a range of widely used formats
- Remote-control your experiment through a web interface from any PC on the same network as your phone. No need to install anything on those PCs - all you need is a modern web browser.
- Define your own experiments by selecting sensor inputs, defining analysis steps and creating views as an interface using our web-editor (http://phyphox.org/editor). The analysis can consists of just adding two values or using advanced methods like Fourier transforms and crosscorrelation. We offer a whole toolbox of analysis functions.
Sensors supported:
- Accelerometer
- Magnetometer
- Gyroscope
- Light intensity
- Pressure
- Microphone
- Proximity
- GPS
*some sensors are not present on every phone.
Export formats
- CSV (Comma separated values)
- CSV (Tab-separated values)
- Excel
(if you need other formats, please let us know)
This app has been developed at the 2nd Institute of Physics A at the RWTH Aachen University.
--
Explanation for the permissions requested
If you have Android 6.0 or newer, some permissions will only be asked for when needed.
Internet: This grants phyphox network access, which is required to load experiments from online resources or when using the remote access. Both are only done when requested by the user and no other data is transmitted.
Bluetooth: Used to access external sensors.
Read external storage: This is may be necessary when opening an experiment stored on the device.
Record audio: Required to use the microphone in experiments.
Location: Used to access GPS for location-based experiments.
Camera: Used to scan QR codes for external experiment configurations.
คุณรู้หรือไม่ว่าคุณกำลังพกพาเครื่องวัดสนามแม่เหล็ก 3D? คุณสามารถใช้โทรศัพท์ของคุณเป็นลูกตุ้มเพื่อวัดความเร่งโน้มถ่วงของโลกได้หรือไม่? ที่คุณสามารถเปลี่ยนโทรศัพท์ของคุณเป็นโซนาร์หรือไม่?
ไฟโทท็อกซ์ช่วยให้คุณเข้าถึงเซ็นเซอร์ของโทรศัพท์ของคุณโดยตรงหรือผ่านการทดสอบพร้อมเล่นซึ่งวิเคราะห์ข้อมูลของคุณและให้คุณส่งออกข้อมูลดิบพร้อมกับผลลัพธ์สำหรับการวิเคราะห์เพิ่มเติม คุณสามารถกำหนดการทดสอบของคุณเองบน phyphox.org และแบ่งปันกับเพื่อนร่วมงานนักเรียนและเพื่อน ๆ
คุณสมบัติที่เลือก:
- การเลือกการทดสอบที่กำหนดไว้ล่วงหน้า เพียงกดปุ่มเล่นเพื่อเริ่ม
- ส่งออกข้อมูลของคุณไปยังรูปแบบที่ใช้กันอย่างแพร่หลาย
- ควบคุมการทดสอบของคุณจากระยะไกลผ่านเว็บอินเตอร์เฟสจากพีซีเครื่องใดก็ได้ในเครือข่ายเดียวกับโทรศัพท์ของคุณ ไม่จำเป็นต้องติดตั้งอะไรบนพีซีเหล่านั้น - เพียงคุณมีเว็บเบราว์เซอร์ที่ทันสมัย
- กำหนดการทดสอบของคุณเองโดยเลือกอินพุตเซ็นเซอร์กำหนดขั้นตอนการวิเคราะห์และสร้างมุมมองเป็นอินเทอร์เฟซโดยใช้เครื่องมือแก้ไขเว็บของเรา (http://phyphox.org/editor) การวิเคราะห์สามารถประกอบด้วยเพียงการเพิ่มสองค่าหรือใช้วิธีการขั้นสูงเช่นการแปลงฟูริเยร์และการเชื่อมโยงข้าม เรานำเสนอกล่องเครื่องมือทั้งหมดของฟังก์ชั่นการวิเคราะห์
เซ็นเซอร์ที่รองรับ:
- มาตรความเร่ง
- Magnetometer
- Gyroscope
- ความเข้มของแสง
- ความดัน
- ไมโครโฟน
- ความใกล้ชิด
- จีพีเอส
* เซ็นเซอร์บางตัวไม่มีในโทรศัพท์ทุกรุ่น
ส่งออกรูปแบบ
- CSV (ค่าที่คั่นด้วยเครื่องหมายจุลภาค)
- CSV (ค่าที่คั่นด้วยแท็บ)
- Excel
(หากคุณต้องการรูปแบบอื่น ๆ โปรดแจ้งให้เราทราบ)
แอพนี้ได้รับการพัฒนาที่ 2 สถาบันฟิสิกส์ A ที่มหาวิทยาลัย RWTH อาเค่น
-
คำอธิบายสำหรับสิทธิ์ที่ร้องขอ
หากคุณมี Android 6.0 หรือใหม่กว่าการอนุญาตบางอย่างจะถูกถามเมื่อจำเป็นเท่านั้น
อินเทอร์เน็ต: เป็นการให้การเข้าถึงเครือข่ายไฟทอกซ์ซึ่งจำเป็นสำหรับการโหลดการทดสอบจากแหล่งข้อมูลออนไลน์หรือเมื่อใช้การเข้าถึงระยะไกล ทั้งคู่จะทำก็ต่อเมื่อผู้ใช้ร้องขอและไม่มีการส่งข้อมูลอื่น
บลูทู ธ : ใช้เพื่อเข้าถึงเซ็นเซอร์ภายนอก
อ่านที่เก็บข้อมูลภายนอก: สิ่งนี้อาจจำเป็นเมื่อเปิดการทดลองที่เก็บไว้ในอุปกรณ์
บันทึกเสียง: จำเป็นต้องใช้ไมโครโฟนในการทดลอง
ตำแหน่ง: ใช้เพื่อเข้าถึง GPS สำหรับการทดลองตามตำแหน่ง
กล้อง: ใช้เพื่อสแกนรหัส QR สำหรับการกำหนดค่าการทดสอบภายนอก